M10 (20Nm)
Single Pole Voltage Transformer

UGE D2

The UGE D2 is used for measurement and protection in applications, especially in medium-voltage switchgears. The single pole indoor voltage transformer can be used up to 24kV.

2/√3kV - 22/√3kV
100/√3V or 110/√3V, other options available on request
As required. For example 10, 15 or 30VA
Ask an offer now
We never go for the simplest solution, but for the best solution, for you, as a customer. Please contact me for the best solution for you.
Wim van Turennout, Key Account Manager
+31 (0)521 533 313
Order specifications
Rated output Ratio Winding 1 Winding 2 Range Article number
As required. For example 10, 15 or 30VA 5.400:√3 / 110:√3 / 110:3 30VA cl 0.2 30VA 3P 17,5 kV 6U1191
As required. For example 10, 15 or 30VA 6.600:√3 / 110:√3 / 110:3 30VA cl 0.2 30VA 3P 17,5 kV 6U1192
As required. For example 10, 15 or 30VA 10.000:√3 / 110:√3 30VA cl 0.2 - 17,5 kV 6U2191
As required. For example 10, 15 or 30VA 11.000:√3 / 110:√3 / 110:3 30VA cl 0.2 30VA 3P 17,5 kV 6U2192
As required. For example 10, 15 or 30VA 15.400:√3 / 110:√3 30VA cl 0.2 - 17,5 kV 6U3191
As required. For example 10, 15 or 30VA 20.000:√3 / 100:√3 / 100:3 0-20VA cl 0.2 60VA 3P 24 kV 6U4011
As required. For example 10, 15 or 30VA 22.000:√3 / 100:√3 / 100:3 0-20VA cl 0.2 60VA 3P 24 kV 6U4012
As required. For example 10, 15 or 30VA 22.000:√3 / 110:√3 / 110:3 0-20VA cl 0.2 60VA 3P 24 kV 6U4110
As required. For example 10, 15 or 30VA 20.000:√3 / 110:√3 / 110:3 0-20VA cl 0.2 60VA 3P 24 kV 6U4112
Order specifications
For the customized design of your ELEQ voltage transformer the following information is required:

Mandatory
Rated primary voltage
Rated secondary voltage
Rated output
Accuracy class
Frequency

Optional
Other relevant requirements
General Technical Specifications
This product is designed to be safe under the following conditions:
Environmental conditions
Indoor use
-5°C .. +40°C, other temperatures on request
-25°C .. +50°C
5% .. 95%, non condensing
Max. 1000m above NN; at >1000m data required
IP20
Application conditions
IEC 61869-3/IEEE C57.13, etc.
500VA measuring winding in total 100VA residual winding
1,9 x Un for 8 h, 1,2 x Un continuous
24/50/125kV
50/60Hz
E
2/√3kV - 22/√3kV
100/√3V or 110/√3V, other options available on request
As required. For example 10, 15 or 30VA
M10 (20Nm)
Screw terminals M5 (max. 2,5Nm)
As required. For example 0,2, 3P
Downloads
The following downloads are available for this product.