UGE C1
Single Pole Voltage Transformer
The UGE C1 is used for measurement and protection in applications, especially in medium-voltage switchgears. The single pole indoor voltage transformer can be used up to 17,5kV
Input:2/√3kV – 15,4/√3kV
Secondary voltage:100/√3V or 110/√3V, other options available on request
Rated output:As required. For example 10, 15 or 30VA
M10 (20Nm)
Order specification
| Rated output | Ratio | Winding 1 | Winding 2 | Range | Article number |
|---|---|---|---|---|---|
| As required. For example 10, 15 or 30VA | 10.000:√3 / 100:√3 / 100:3 | 0-20VA cl 0.2 | 60VA 3P | 12kV | 6U2011 |
| As required. For example 10, 15 or 30VA | 11.000:√3 / 100:√3 / 100:3 | 0-20VA cl 0.2 | 60VA 3P | 12kV | 6U2012 |
| As required. For example 10, 15 or 30VA | 11.000:√3 / 110:√3 / 110:3 | 0-20VA cl 0.2 | 60VA 3P | 12kV | 6U2110 |
| As required. For example 10, 15 or 30VA | 10.000:√3 / 110:√3 / 110:3 | 0-20VA cl 0.2 | 60VA 3P | 12kV | 6U2112 |
| As required. For example 10, 15 or 30VA | 11.000/13 // 110:13 // 110/3 V or 10.000/13 // 100:13 // 100/3 V | 0-20VA cl 0.2 or 0-15VA cl 0.2 | 60VA 3P | 12kV | 6V2901 |
General technical specifications
This product is designed to be safe under the following conditions:
Environmental conditions
LocationIndoor use
Ambient air temperature-5°C .. +40°C, other temperatures on request
Storage and transport temperature-25°C .. +50°C
Relative humidity5% .. 95%, non condensing
AltitudeMax. 1000m above NN; at >1000m data required
Protection degree (secondary terminal)IP20
Application conditions
StandardIEC 61869-3/IEEE C57.13, etc.
RatedThermalLimitingOutputSth500VA measuring winding in total 100VA residual winding
Rated voltage factor1,9 x Un for 8 h, 1,2 x Un continuous
Rated insulation level17,5/38/95kV
Rated frequency50/60Hz
Class of insulationE
Rated primary voltage2/√3kV – 15,4/√3kV
Rated secondary voltage100/√3V or 110/√3V, other options available on request
Rated outputAs required. For example 10, 15 or 30VA
Primary connectionM10 (20Nm)
Secondary terminalScrew terminals M5 (max. 2,5Nm)
Accuracy classAs required. For example 0,2, 3P
Downloads for UGE C1
1Downloads available
Talk to sales
Our customers expect us to be able to offer them a solution for every challenge. For which challenge are you looking for a solution?
Aafje Heinhuis, Inside Sales