Transformers

Easy to install current transformers for revenue metering that ensure lower engineering costs and eliminates paperwork of test reports.

Easy to install current transformers for revenue metering that ensure lower engineering costs and eliminates paperwork of test reports. For Germany (mit Konformitätserklärung)

These – over the full operational temperature range - accurate current transformers are suitable for measurement and for revenue metering (billing)

These – over the full operational temperature range - accurate current transformers are suitable for measurement and for revenue metering (billing)

These – over the full operational temperature range - accurate current transformers are suitable for measurement and for revenue metering (billing)

GSA Cast Resin Current Transformers: Perfect, safe design offering full flexibility in housing

The SBM 106-54-82 is a low voltage current transformer for mounting around the bushing/conus connector in switchgear applications.

The SBM 106-54-82 is a low voltage current transformer for mounting around the bushing/conus connector in switchgear applications.

The SVA100 is specially designed for application in medium voltage installations as RMU’s.

The SVA100 is specially designed for application in medium voltage installations as RMU’s.

The SVA105 is especially designed for application in medium voltage installations around insulated cables.

The SVA150 is specially designed for application in medium voltage installations as Ring Main Units.

The SVA150 is specially designed for application in medium voltage installations as Ring Main Units.

The SVA150 is specially designed for application in medium voltage installations as Ring Main Units.

The SVA150 is specially designed for application in medium voltage installations as Ring Main Units.

The SVA150 is specially designed for application in medium voltage installations as Ring Main Units.

The low power switchgear current transformers in SVA100 housing is specially designed for application in medium voltage installations as Ring Main Units (RMU).

The current transformer for self powered relay in SVR109 housing is specially designed for application in medium voltage installations as Ring Main Units (RMU).

One-piece cast-resin CT suitable to put on cable or cable bushing: Type SVA for earth fault detection.

The load resistors have been specially developed to bring the charge of a current transformer within 25% and 100% of the value mentioned on the type plate of the power transformer.

In its sealable module, the VSR600 load resistor simultaneously modifies the burden of all three phases according to the required values.

In its sealable module, the VSR600 load resistor simultaneously modifies the burden of all three phases according to the required values.

GSK Split-Core Current Transformers: perfect design offering full flexibility and compliance with all regulations.

The TM800 Split-core Current Transformer is suitable for cable and busbar.

The TM2000 Split-core Current Transformer is suitable for cable and busbar.

With the ZK4-M6/M8 it is possible to make a safe and simple fused voltage branch in your distribution system.

With the UAK it is possible to make a safe and simple fused voltage branch in your distribution system.

The very compact RM27 is ideal for measuring low values with a high accuracy in locations where the dimensions are critical, for instance on a three phase circuit breaker with a fase distance of 17,5mm.

The ELEQ Power Sensor combines three functions in one product: the rail terminal, the current transformer and the fused voltage tap. So the VCT32 enables both an accurate current measurement and a voltage measurement in one product.

Voltage tap for shunt or rail can be used to make a safe and simple fused voltage tap in your distribution system.

This UAD6 easy voltage tap allows you to tap a fused voltage from an insulated wire for measurement using one hand and without the need for additional tools.

This UAD6 easy voltage tap allows you to tap a fused voltage from an insulated wire for measurement using one hand and without the need for additional tools.

The very compact and highly accurate Summation Transformer makes it possible to sum the outputs from 2 or 3 ELEQ TQ split-core transformers to 1 signal to your multi instrument.

The ELEQ EM223 is a current transducer for converting an alternating current of up to 400A to a 0-20mA signal.

The ELEQ EM228 is an active current transducer for converting an alternating current of up to 1250A to an 4-20mA (standard), 0-20mA or 0-10V signal.

The ELEQ EM229 is an active current transducer for converting an alternating current of up to 250A to a 4-20mA, 0-20mA of 0-10V signal.

The ELEQ EM238 is a two-wire transmitter for converting alternating current to a 4-20mA signal. The auxiliary supply of 10-40Vdc is included in the output circuit.

The ELEQ current relay EM303 is suitable for an alternating current of up to 100A and has a fixed switching point of 0.5A. Other switching points are available on customer specification.

The ELEQ current relay EM305 is suitable for an alternating current of up to 100A. The switching point and speed of response are adjustable.

The GST170 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars. The cast resin insulated indoor split core type current transformer can be used up to 1,2kV.

The GST200 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars. The cast resin insulated indoor split core type current transformer can be used up to 1,2kV.

The GST170 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars. The cast resin insulated indoor split core type current transformer can be used up to 1,2kV.

The GSK 170 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars. The cast resin insulated indoor split core type current transformer can be used up to 1,2kV.

The SBB are bandaged current transformers in assembly sets for installations in switchgears or cable cellars. The indoor current transformer can be used up to 0,72 kV and is maintenance-free and mountable in any position.

The ESBM 106-54-82 is a low voltage current transformer for mounting around the bushing/conus connector in switchgear applications. Due to its optimized design it fits around almost all bushing connectors. These current transformers are supplied with a declaration of conformity.

The ESBM 106-54-82 is a low voltage current transformer for mounting around the bushing/conus connector in switchgear applications. Due to its optimized design it fits around almost all bushing connectors. These current transformers are supplied with a declaration of conformity.

The GSA100 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA105 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA110 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA120 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA130 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA135 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA150 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA170 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA200 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA235 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA250 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA300 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA350 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA400 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The GSA500 is a cast-resin insulated bushing-type current transformer for indoor applications. They are suitable to put on cables or bus-bars.

The SVA150 is specially designed for application in medium voltage installations as Ring Main Units.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

Flexible, compact and reliable, those are the keywords of the (E)RM-series of ELEQ. All transformers are equipped with a sealable integrated terminal cover in a case of polycarbonate.

The GSK 100 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars.

The GSK 120 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars.

The GSK 135 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars.

The GSK 150 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars.

The GSK 170 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars.

The GSK 200 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars.

The GSK 250 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars.

The GSK 300 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars.

The GSK 350 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars.

The GSK 400 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars.

The GSK 500 are cast-resin insulated current transformers for indoor applications. They are suitable to put on cables or bus-bars.

The low power switchgear current transformers in SVR109 housing is specially designed for application in medium voltage installations as Ring Main Units (RMU).

The very compact RM17 is ideal for measuring low values with a high accuracy in locations where the dimensions are critical, for instance on a three phase circuit breaker with a fase distance of 17,5mm.

Among other things decentralized generation (solar panels, wind turbines) is leading to an increasing number of unusual voltages, such as 690V. To still use the standard meters (400/230V), ELEQ has developed a new line of voltage transformers for low voltage.

The very compact ELEQ TQ30 split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ40-B split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ40-B split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ40-C split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ40-C split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ50-E split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ50-E split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ50-L split-core current transformer is especially designed for connection to digital measurement systems.

The very compact ELEQ TQ50-L split-core current transformer is especially designed for connection to digital measurement systems.