Power distribution |
< back |
| ELEQ Current transformers for cable and busbar, IA-series |
 |
- Primary current up to 6000A
- Suitable for measurement and protection
- Width programme (IA60…IA200)
- Modern design with integrated terminal cover
- KEMA-KEUR certified
|
| ELEQ Current transformer systems |
 |
- Primary current up to 30.000A
- Suitable for all special applications in measurement protection and accounting
- Patented subassembly constructions
- Subassembly construction tested and reported as one set
- Colour coded secondary leads
|
| ELEQ Power Sensor VCT32 |
 |
- Ranges for 16/1A, 35/1A, 64/1A
- For cables up to 16mm²
- Current and voltage measurement
- Fused voltage directly from the busbar
- High accuracy
- Reliable, lower assembly costs and little chance of connecting error
- KEMA-KEUR certified
|
| ELEQ Cast resin current transformers for indoor or outdoor application, model GSA(F) |
 |
- Primary current from 20A up to 10kA
- For measurement, protection and billing purposes
- Models for indoor and outdoor applications
- Max. 3 measurements in one housing
- Various extra parts available to mount the transformer in any position you want.
- Various window sizes Ø 90….350mm
- PTB and KEMA approved for fiscal measurements
|
| ELEQ Split-core cast resin current transformers for indoor or outdoor application, model GSK(F) |
 |
- Primary current from 50A up to 10kA
- For measurement, protection and billing purposes
- Very flexible in dimensions
- Split-core, applicable in existing installations
- Various window sizes Ø 90….350mm
|
| ELEQ Medium voltage insulated current transformers for indoor application, model IGW |
 |
- Primary current from 5A up to 3000A
- For measurement, protection and billing purposes
- Rated insulation level up to 36kV
- Max. 3 measurements in one housing
- Upon request models with capacitive voltage divider deliverable (for voltage indication)
- PTB and KEMA approved for fiscal measurements
|
| ELEQ Medium voltage insulated voltage transformers for indoor application, model UGE/UGZ |
 |
- Measuring voltage up to 24kV
- One-pole insulated, model UGE
- Two-pole insulated, model UGZ
- Maximum insulation level 24/50/125kV
- PTB and KEMA approved for fiscal measurements
|
| ELEQ Current transformer for earthfault detection |
 |
- One-piece cast-resin current transformer SVA160A100 for earth fault detection.
- Maximum cable diameter = 100mm.
|
| ELEQ Current transformer for "CT Powered"relay |
 |
- "low power"
- For application in RMU's in combination with
- Woodward SEG WIC1
- ABB REJ603
- Areva MiCOM P114S
- Measuring current 8-600A in 1 model
|
| ELEQ WI-WIC |
 |
- Convertor from WI to WIC
- 1 module, 3 phases
- Remplacement of WI transformers not necessary
- Cost effective
|
| ELEQ Outdoor current transformer, model IGWF |
.jpg) |
- Primary current from 5A up to 2500A
- For measurement, protection and billing purposes
- Rated insulation level up to 36kV
- 1-5 measurements in one housing
- Creepage distance up to 1120mm
|
| ELEQ Outdoor head current transformer, model IGHF |
.jpg) |
- Primary current from 50A up to 3000A
- For measurement, protection and billing purposes
- Rated insulation level up to 24kV
- 1-5 measurements in one housing
- Creepage distance up to 1124mm
|
| ELEQ Choke module for supressing ferro-resonance |
 |
- To prevent ferroresonance voltage transformers
- To be connected with the protection winding
- Suppress upper and lower harmonics
- Equipped with coil and resistance
- Assembled in solid stealcase housing 222x190x229mm
- Different models for differen Burden
|
| ELEQ Easy Voltage Tap for wires, model UAD16 |
 |
- One-handed and safe tapping of voltage for measurement purposes
- No tools needed
- Safe mounting
- Including 5x25mm, 2A fuse
- For insulated 10-16mm2 conductors, stranded and solid
- Breaking capacity 6kA/400/50Hz
|
| ELEQ Compact measuring transducers, EM400 and EM800 series |
 |
- Suitable for AC and DC measurements!
- Compact dimensions, easy to mount
- Terminals with cage clamp technology
- True RMS (EM800 series)
- 48 hours service (EXW)
- Measuring and auxiliary voltage up to 440V
- Lloyd's Register of Shipping approval (EM800)
|
| Selectable transducers, EM2000 series |
 |
- Easily changed, you can change the configuration any time you want
- Auxiliary and measuring voltage up to 690Vac
- No delivery time
- Non lineair output characteristics possible
- Class 0.5 True RMS
|
| ELEQ ELEQTransducers integrated in current transformers, EM200 series |
 |
- Complete line with intelligent transformers
- Primary current up to 1250A
- Higher accuracy than seperate CT and transducer
- Saving in assembly time and assembly space
- Less cabling, so less chance of breakdown
- Lower purchase costs
- Special model for power measurement
|
| ELEQ Current relays integrated in current transformer |
 |
- Relays integrated in housing current transformer
- Primary current from 0.5A up tot 100A
- EM303 with fixed switching point
- EM305 with adjustable switching point
- EM501 fitted for LED 2 lights
- Auxiliary supply 24Vdc
|
| ELEQ Universal measuring transducer EM4000 |
 |
- Compact housing
- High accuracy
- Full galvanic separation
- MODbus® (RS232/RS485)
- 3 Analogue + 1 Pulse output
- Direct measurement up to 690V
- 48 hour service EXW
|
| ELEQ Transformer meters, meter combined with splitcore CT, TMB and TMBE series |
 |
- Primary current from 60 up to 2000A
- No dismantling or circuit interruptions
- Suitable for cable and busbar
- Self supporting design, so the meter can even be mounted directly on a high voltage rail!
- Easy to read, the ammeter can be adjusted in two directions in relation to the current transformer
|
| ELEQ Power Sensor VCT32 |
 |
- Railterminal with integrated current transformer and fused terminal
- Saves space, time and money
- Avoids installation mistakes
- Specially developed for power measurement up to 64A
- Current ratios 16/1, 35/1 and 64/1A
- Breaking capacity 70kA@400V/50Hz
- KEMA-KEUR certified
|
| ELEQ Split-core Current sensor, model TQ30 |
.jpg) |
- Ideal for use in very confined spaces
- Superfast mounting
- For use round insulated cables Ø42mm max
- Compact and hinged (30mm to 55mm width)
- Low power output
- Include colour-coded leads
|
| ELEQ Easy Voltage Tap for busbar, model UAK |
 |
- Terminal for tapping voltage from busbars
- Particulary suitable for voltage-tapping for power meters
- Model with fuse directly on busbar
- Primary connection using M8 Allen screw
- KEMA-KEUR certified
- Breaking capacity 70kA@400V/50Hz (up to 6.3A fused)
|
| ELEQ Easy Voltage Tap for wires, model UAD16 |
|
- One-handed and safe tapping of voltage for measurement purposes
- No tools needed
- Safe mounting
- Including 5x25mm, 2A fuse
- For insulated 10-16mm2 conductors, stranded and solid
- Breaking capacity 6kA/400V/50Hz
|
| ELEQ Protection transformer, model SVR 109 |
 |
- Specially designed for MV switchgears
- Solutions available from 16 up to 896A
- Output current 0.075A
- Cable length 110mm or other length on request
- Standard connector code FKCVR 2.5/ 4-ST
- Solid, reliable cast resin product
- Dimensions (LxWxH) 109-70-50mm
- Primary cable diameter max. 50mm
|
| ELEQ Splitcore protection transformer, model GSK 170 |
 |
- * In design
- Split-core, applicable for existing installations
- Solutions available from 16 up to 896A
- Output current 0.075A
- Maximum Cable diameter 60mm
- Solid, reliable cast resin product
- Dimensions (LxWxH) 170x120x218mm
|
| ELEQ Converter, model IMF 120 |
 |
- * In design
- Product converts from WI, 1A or 5A signal to the CTPR standard (output current 0.075A)
- One unit for all 3 Phases
- Easy to install on a mounting plate
- Direct applicalbe without re-wiring
- Pluggable connectors
- Dimensions (LxWxH) 113x117x120mm
|
