Fiscal metering |
< back |
| ELEQ Current transformer for accounting, IA series |
 |
- Primary current up to 2500A
- Modern design with an sealable integrated terminal cover
- Product provided with barcode and serial number linked with unique measuring data
- Measurement reports available on internet
- Coloured rating plates possible
|
| ELEQ Cast resin current transformers for indoor or outdoor application, model GSA(F) |
 |
- Primary current from 20A up to 10kA
- For measurement, protection and billing purposes
- Models for indoor and outdoor applications
- Max. 3 measurements in one housing
- Various extra parts available to mount the transformer in any position you want.
- Various window sizes Ø 90….350mm
- PTB and KEMA approved for fiscal measurements
|
| ELEQ Split-core cast resin current transformers for indoor or outdoor application, model GSK(F) |
 |
- Primary current from 50A up to 10kA
- For measurement, protection and billing purposes
- Very flexible in dimensions
- Split-core, applicable in existing installations
- Various window sizes Ø 90….350mm
|
| ELEQ Medium voltage insulated current transformers for indoor application, model IGW |
 |
- Primary current from 5A up to 3000A
- For measurement, protection and billing purposes
- Rated insulation level up to 36kV
- Max. 3 measurements in one housing
- Upon request models with capacitive voltage divider deliverable (for voltage indication)
- PTB and KEMA approved for fiscal measurements
|
| ELEQ Medium voltage insulated voltage transformers for indoor application, model UGE/UGZ |
 |
- Measuring voltage up to 24kV
- One-pole insulated, model UGE
- Two-pole insulated, model UGZ
- Maximum insulation level 24/50/125kV
- PTB and KEMA approved for fiscal measurements
|
| ELEQ WI-WIC |
 |
- Convertor from WI to WIC
- 1 module, 3 phases
- Remplacement of WI transformers not necessary
- Cost effective
|
| FAGET Load resistors to raise the secondary load of current transformers, model WSR60 |
 |
- Especially developed for accounting purposes
- Standard ranges 1, 1,5, 2,5 or 4VA
- Modern housing with high contact safety
- Easy to mount on top hat rail
- Compact dimensions (30x60x80mm)
- Tested for heat development
- Bifilar coil means no extra phase angle error in kWh-measurement
|
| Completely assembled 3 phase box with load resistors for voltage transformers, model VSR600 |
 |
- Especially developed for accounting purposes
- Suitable for ../100V & ../110V
- Star connection, common zero
- Sealable
- Provided with cable input PG13.5
- Box incl. fuses 0.5A
- Environmental temperature max. 50°C
- With thermal protection
- Dimensions (281x105x73mm)
|
| FAGET Fuse holder for miniature fuse links, model ZK4 |
 |
- Compact, easy to mount fuse terminal
- Direct connection to busbar
- Short circuit current up to 70kA at 400V with fuse link 1A (35kA with fuse link 6.3A)
- KEMA approval
- Width range of current branch guards
|
| ELEQ Choke module for supressing ferro-resonance |
 |
- To prevent ferroresonance voltage transformers
- To be connected with the protection winding
- Suppress upper and lower harmonics
- Equipped with coil and resistance
- Assembled in solid stealcase housing 222x190x229mm
- Different models for differen Burden
|
| Completely assembled 3 phase box with load resistors for current transformers, model WSR600 |
|
- Especially developed for accounting purposes
- Maximal burden 3 x 14W
- Suitable for ../1A and ../5A
- Sealable
- Provided with cable input PG13.5
- Environmental temperature max. 50ºC
- Dimensions (281x105x73mm)
|
